Sec. 32-505.01
Dimensional standards
Servicing
- Applies near
- Manassas Regional Airport
- Geographic extent
- Applies to the Manassas Regional Airport imaginary surfaces including approach, conical, horizontal, and transitional zones as delineated on the Manassas Regional Airport Imaginary Surfaces Map.
Extracted standards
6 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Approach surface width for runway 16L at 50,000 ft16,000 ft
The approach zone for runway 16L expands outward uniformly to a width of 16,000 feet to a horizontal distance of 50,000 feet from the primary surface.
- Approach surface width at 10,000 ft3,500 ft
The approach expands outward uniformly to a width of 3,500 feet at a horizontal distance of 10,000 feet from the primary surface for runway 16R-34L and the approach to runway 34R.
- Conical surface slope20 ratio
Conical surface means a surface extending outward and upward from the periphery of the horizontal surface at a slope of 20:1 for a horizontal distance of 4,000 feet.
- Conical zone horizontal distance4,000 ft
Conical zone (APC) is established on the area that commences at the periphery of the horizontal zone and extends outward therefrom for a distance of 4,000 feet, and upward at a slope of 20:1.
- Horizontal surface heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. above airport elevation150 ft
Horizontal surface means a horizontal plane 150 feet above the established airport elevation.
- Transitional surface slope7 ratio
Transitional surfaces extend at a slope of seven feet horizontally for each foot vertically from the sides of the primary and approach surfaces.
From the ordinance
The Airport Safety Overlay District is established in recognition of airport related hazards... It is the intent of this overlay district to regulate vertical encroachment obstructions within the airport protection area.