Sec. 83-432(c)(1)b
Dimensional standards
Density
- Maximum units
- 1
Extracted standards
5 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Design
- Residential portion behind/above nonresidential
The residential portion of the building shall be located behind and/or above the nonresidential portion of the building.
Other
- Maximum one dwelling unitDwelling unitOne independent home: its own kitchen, bathroom and entrance. in residential portion1 unit
There shall be no more than one dwelling unit within the residential portion of the building.
- Minimum nonresidential floor area500 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
The nonresidential portion of the building shall be at least 500 square feet in area or 25 percent of the total floor area of the building, whichever is greater.
- At least one resident engaged in commercial activity
At least one resident of a live/work dwelling shall be engaged in the commercial activity performed within the nonresidential portion of the building.
Use
- Commercial activity limited to permitted uses
Commercial activity performed within the nonresidential portion of the building shall be limited to those uses permitted by the regulations of the zoning district in which such unit is located.
From the ordinance
The residential portion of the building shall be located behind and/or above the nonresidential portion. The nonresidential portion shall be at least 500 square feet in area or 25 percent of the total floor area, whichever is greater. At least one resident shall be engaged in the commercial activity. There shall be no more than one dwelling unit within the residential portion.