Northampton County Unincorporated, Virginia · General provision
§ 154.2.062
Dimensional standards
Extracted standards
2 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Double and reverse frontageFrontageThe length of a lot line that touches a public street. lots prohibitedProhibitedNot allowed in the district at all, short of rezoning or a variance.
Except in situations specifically authorized by this chapter, or where no other access is physically possible, double and/or reverse frontage lots are prohibited in all residential developments and residentially-zoned districts.
- Minimum lot frontageFrontageThe length of a lot line that touches a public street. on public street or private road75 pct
Every lot established and used for single-family residential development shall have a frontage on a public street or private road of not less than 75% of the lot width at the required building setback line, except that the frontage of lots located on the turnaround of cul-de-sac streets may be reduced to 50% of the width at the building line.
From the ordinance
Every lot established and used for single-family residential development shall have a frontage on a public street or private road of not less than 75% of the lot width at the required building setback line, except that the frontage of lots located on the turnaround of cul-de-sac streets may be reduced to 50% of the width at the building line.