Dimensional standards
Extracted standards
22 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Illumination type
White external lights only
- Maximum number of sign faces2 count
No sign shall have more than two faces
- Maximum signs per lot1 count
Maximum signs per lot: One, except where otherwise specifically provided in this article
- Portable sign display restriction
Such signs shall not be displayed after business hours
- Portable sign location restriction
shall not be placed in the public right-of-way or public access easement in a manner that blocks pedestrian travel
- Portable sign maximum area (two-sided or A-frame)24 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
24 square feet for a two-sided sign or A-frame sign
- Portable sign maximum area (single-sided)12 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Such signs are allowed up to 12 square feet for a single-sided sign
- Portable sign maximum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.4 ft
The maximum height shall be four feet
- Portable sign permit required0 boolean
No permit is required
- Projecting sign maximum area12 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
The area of a projecting sign may be one square foot per linear foot of building facade on which the sign is to be attached, up to 12 square feet
- Projecting sign maximum horizontal extension3 ft
A projecting sign may extend horizontally from the building to which it is mounted no more than three feet
- Projecting sign minimum clearance over walkway8 ft
If located over a pedestrian walkway, the bottom of a projecting sign shall be at least eight feet above the walking surface
- Security, directional, and warning sign maximum area2 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Signs shall not exceed 2 square feet in area
- Security, directional, and warning sign maximum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.6 ft
or 6 feet in height
- Security sign permit required0 boolean
No permit is required
- Wall sign maximum aggregate area100 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
up to a maximum aggregate of 100 square feet
- Wall sign maximum area per linear foot of facade1 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000./ft
The maximum area of any wall sign shall not exceed one square foot for each linear foot in length of the building facade
- Wall sign maximum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. above grade25 ft
No part of a wall sign shall be located at height exceeding 25 feet above the finished grade
- Window sign illumination hours
illuminated only during hours of operation
- Window sign internally-illuminated maximum area2 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
not to exceed a maximum area of two square feet
- Window sign maximum coverage of window area20 pct
Such signs shall cover no more than 20 percent of the total window area
- Window sign maximum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. (floor level)1 floor
shall be located no higher than the first floor of a building
From the ordinance
Maximum signs per lot: One, except where otherwise specifically provided in this article. Number of sign faces: No sign shall have more than two faces. Illumination: White external lights only.