Loudoun County Unincorporated, Virginia · General provision
Section 7.01.03
Dimensional standards
Extracted standards
4 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Reduced frontageFrontageThe length of a lot line that touches a public street. for curved roads60 pct
may be reduced to 60% of required lot width if such frontage is along a curved or circular (cul-de-sac) road with a radius that does not exceed 90 feet.
- Maximum radius for reduced frontageFrontageThe length of a lot line that touches a public street.90 ft
radius that does not exceed 90 feet
- Irregular lots exception
Irregular lots are not subject to lot width requirements, provided yards are not less than those required for a regular lot and buildable area is sufficient.
- Minimum frontageFrontageThe length of a lot line that touches a public street. as percentage of lot widthLot widthHow wide a lot must be, usually measured at the front setback line.80 pct
The distance, as measured along a lot's frontage, between the points where a lot's side lot lines intersect with the boundary of the road must not be less than 80% of required lot width.
From the ordinance
The distance, as measured along a lot's frontage, between the points where a lot's side lot lines intersect with the boundary of the road must not be less than 80% of required lot width. Exception: may be reduced to 60% if frontage is along a curved or circular road with radius ≤ 90 ft.