Loudoun County Unincorporated, Virginia · General provision
Section 4.02.04
Dimensional standards
Lot
Density
- Maximum units
- 1
Servicing
- Geographic extent
- Applies to Manufactured HomesManufactured homeA dwelling built in a factory to a federal standard and transported to the site. in all zoning districts where permitted. Design standards apply outside AR-1, AR-2, A-3, A-10, and TR-10 Zoning Districts.
Extracted standards
6 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Design
- Foundation enclosure
Perimeter non-load bearing foundation enclosures must be masonry, stone or concrete
- Minimum width19 ft
a minimum of 19 feet in width
- Permanent foundation
wheels, axles, transporting lights, and removable towing apparatus removed from the site and must be placed on a permanent foundation
- Roof material
non-reflective roof material such as asphalt or wood shingles, tile, metal, or slate
- Roof overhang
Include a minimum of either a 6-inch overhang and a 4-inch gutter or 12-inch overhang on the front and back and a minimum of 6-inch overhang on the sides
- Roof pitch4 in/12in
Be pitched with a minimum vertical rise of 4 inches for each 12 inches of horizontal run
From the ordinance
Manufactured homes must be at least 900 square feet in floor area and a minimum of 19 feet in width; Roofs must be pitched with a minimum vertical rise of 4 inches for each 12 inches of horizontal run; ...