Section 2.01.01

Other

• Crosswalk marking in Inner and Outer Core

  crosswalks in the Inner Core and Outer Core Subareas must be clearly marked through use of change in paving materials, height, or distinctive colors

• Crosswalk marking in TDSA

  In the TDSA, painted crosswalks may be used.

• Maximum eave cantilever over pedestrian walkway3 ft

  Eaves are permitted to cantilever over a pedestrian walkway no more than 3 feet.

• Maximum glazing and/or building entrances on ground floor frontageFrontageThe length of a lot line that touches a public street.90 pct

  Include between 65% and 90% glazing and/or building entrances

• Minimum clear heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. for Commercial or Public/Civic/Institutional uses12 ft

  Include a minimum 12-foot clear height for Commercial or Public/Civic/Institutional uses

• Minimum clear heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. for Residential and Office uses10 ft

  10-foot clear height for Residential and Office uses

• Minimum glazing and/or building entrances on ground floor frontageFrontageThe length of a lot line that touches a public street.65 pct

  Include between 65% and 90% glazing and/or building entrances

• Minimum ground floor commercial frontageFrontageThe length of a lot line that touches a public street. in Inner Core70 pct

  Within the Inner Core Subarea, at least 70% of the ground floor building frontage ... must contain Commercial or Public/Civic/Institutional Uses

• Minimum ground floor commercial frontageFrontageThe length of a lot line that touches a public street. in Outer Core30 pct

  Within the Outer Core Subarea at least 30% of the ground floor building frontage ... must contain Commercial, or Public/Civic/Institutional Uses

• Minimum number of ground floor differentiation features2 count

  Be differentiated from the stories above by providing a minimum of 2 of the following features

• Minimum on-site amenities for buildings >=50,000 sq ftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.2 count

  all buildings containing 50,000 or more square feet of gross floor area must incorporate at least 2 of the on-site amenities listed

• Sidewalks must provide access to primary entrances

  Sidewalks or shared-use paths must provide access to the primary entrance or entrances to each principal building from required sidewalks

• Tree canopy requirements exemption in Inner Core

  Tree canopy requirements of Section 7.03 do not apply to the Inner Core Subarea.