Sec. 86-454

Other

• Lot corner monument specifications

  All lot corners shall be marked with iron pipe not less than three-fourths inch in diameter or iron rod not less than one-half inch in diameter, and not less than 24 inches long and driven so as to be flush with the finished grade.

• No direct access to primary/secondary highway

  no lot shall have direct access to an existing primary or secondary highway

• Reverse frontageFrontageThe length of a lot line that touches a public street. required on U.S. 360 and State 30

  No residential lot shall be platted in a minor subdivision, which has its primary frontage on U.S. Highway 360 or State Highway 30. Reverse frontage lots having access only from a parallel secondary highway or from new public streets are required.

• Single access to primary/secondary highway

  There shall be only one access to an adjacent primary or secondary highway by a new street and no lot shall have direct access to an existing primary or secondary highway.

• Minimum utility easement width15 ft

  Easements of not less than 15 feet in width shall be provided where necessary to meet public utility requirements.