zoneoptics
Independence, Virginia · General provision

§ 151.11(A)(1)

All Independence districts0

Dimensional standards

lot requirementsSTREETMin width 80 ftMin depth 100 ft
Plan view of the district’s stated lot requirements. Solid line: the property line. Dashed: the setback lines the ordinance imposes; a building must stay inside the tinted envelope. Drawn from the figures extracted below — illustrative, not a survey.

Lot

Minimum lot widthLot widthHow wide a lot must be, usually measured at the front setback line.
80 ft
Minimum lot depth
100 ft

Servicing

Geographic extent
Residential lots for single-familySingle-family dwellingOne dwelling unit on its own lot, usually detached from its neighbours. detached dwellings

Extracted standards

3 individual requirements pulled out of this section’s prose, each with the sentence it came from.

Other

  • Minimum average lot depth100 ft

    All lots shall have an average depth of at least 100 feet, and single-tier lots shall have an average depth of at least 125 feet.

  • Minimum average lot depth for single-tier lots125 ft

    All lots shall have an average depth of at least 100 feet, and single-tier lots shall have an average depth of at least 125 feet.

  • Minimum lot widthLot widthHow wide a lot must be, usually measured at the front setback line. at building line80 ft

    residential lots for single-family detached dwellings shall have a minimum width at the building line of 80 feet.

From the ordinance

Except as provided herein, residential lots for single-family detached dwellings shall have a minimum width at the building line of 80 feet. All lots shall have an average depth of at least 100 feet, and single-tier lots shall have an average depth of at least 125 feet.
§ 151.11(A)(1)