Dimensional standards
Density
Height & bulk
Extracted standards
5 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Additional open spaceOpen spaceLand a development must leave unbuilt, sometimes required to be usable or planted. proportional to density increase
Additional open space (common or dedicated) above that required by Table 78-30.4(g)... is provided in proportion to the requested increase in dwelling unit density.
- Additional common recreation space proportional to density increase
Additional common recreation space (developed) above that required by section 78-113.3... is provided in proportion to the requested increase in dwelling unit density.
- Maximum gross density20 du/acdu/acreDwelling units per acre — the number of homes allowed on each acre of land.
The gross density does not exceed 20 dwellings per acre.
- Maximum building heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.50 ft
The height of buildings does not exceed 50 feet.
- No abutting single-familySingle-family dwellingOne dwelling unit on its own lot, usually detached from its neighbours. subdivisions
The development boundaries do not abut any established subdivision containing single-family detached homes.
From the ordinance
The town council may permit an increase in the height and density for multi-family structures in the RM district with a special exception if the proposed RM development meets the following standards: a. The gross density does not exceed 20 dwellings per acre. b. The height of buildings does not exceed 50 feet.