Dimensional standards
Servicing
- Geographic extent
- Applies to all residential districts in the town
Extracted standards
2 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Maximum occupancy for multi-familyMultifamily dwellingA building of four or more dwelling units. Where zoning is most restrictive. dwellings
For multi-family dwellings, the maximum number of occupants of each dwelling unit shall not exceed the quotient of the floor area (measured in square feet) of the dwelling unit divided by 200, rounded to the nearest whole number.
- Maximum occupancy for single-familySingle-family dwellingOne dwelling unit on its own lot, usually detached from its neighbours. dwellings
For single-family attached and detached dwellings or two-family dwellings, the maximum number of occupants of each dwelling unit shall not exceed the quotient of the floor area (measured in square feet) of the dwelling unit divided by the number set forth below, rounded up to the next whole number. The maximum occupancy of single-family dwelling units is as follows: Up to 1,500 sq ft: 300 sq ft per occupant; 1,501-2,100: 350; 2,101-2,800: 400; 2,801-3,600: 450; over 3,600: 500.
From the ordinance
In any district in which residential uses are allowed or legally exist, a dwelling unit shall be occupied only by a family... maximum number of occupants...