Sec. 58-17.7(b), 58-17.8(1), 58-17.14(a)

Signage

• Internally illuminated channel letters permitted

  Permanent channel letter signs in this district may be internally illuminated

• Maximum A-frame sign area12 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.

  Must not be more than an aggregate of 12 square feet

• Maximum A-frame sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.5 ft

  not exceed five feet in height

• Maximum A-frame signs per business1 count

  Only one such sign is permitted per business, or one sign per 30 linear feet of sidewalk

• Maximum projecting sign projection4 ft

  shall project no greater than four feet from building

• Maximum temporary sign area (freestanding/wall/portable/banner)8 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.

  Shall not exceed one sign per location, nor eight square feet in area

• Maximum temporary sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.6 ft

  six feet in height

• Maximum wall sign projection6 in

  Sign shall not extend more than six inches from the surface of the building

• Maximum window sign coverage20 pct

  Shall not obstruct more than 20 percent of the area of the window

• Minimum projecting sign clearance from curb1 ft

  no closer than one foot to the street curb

• Minimum sign setbackSetbackThe distance a building must be held back from a lot line. from lot line10 ft

  At least ten feet from any lot line within the gateway sign area