Sec. 10-3-208(d), 10-3-209, 10-3-212

Signage

• Double-faced sign measurement

  Only one (1) side of a double-faced sign shall count toward the allowable sign area.

• Maximum grand opening sign area32 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.

  Each grand opening sign shall not exceed thirty-two (32) square feet in sign area

• Maximum grand opening sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.8 ft

  and shall not exceed eight (8) feet in height.

• Indirect lighting beam width

  The beam width shall not be wider than that needed to light the sign and aimed to minimize glare and light trespass.

• Maximum sign area for sale/rent in commercial/industrial districts32 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.

  not more than one (1) nonilluminated sign with a total area of up to thirty-two (32) square feet

• Maximum combined sign area for residential improvements12 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.

  one (1) or more temporary signs with a combined total area up to twelve (12) square feet

• Maximum area for permanent sign on residential parcel3 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.

  a permanent sign with a total area of no more than three (3) square feet

• Maximum sign area for sale/rent in residential districts12 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.

  not more than one (1) nonilluminated sign with a total area of up to twelve (12) square feet

• Maximum total area for temporary signs on residential parcels16 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.

  one or more temporary signs with a total area up to sixteen (16) square feet

• Maximum sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. for sale/rent in commercial/industrial districts8 ft

  and a maximum height of eight (8) feet

• Maximum sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. for residential improvements4 ft

  and maximum height of four (4) feet

• Maximum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. for permanent sign on residential parcel4 ft

  and a maximum height of four (4) feet

• Maximum sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. for sale/rent in residential districts6 ft

  and a maximum height of six (6) feet

• Maximum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. for temporary signs on residential parcels4 ft

  and a maximum height of four (4) feet

• ProhibitedProhibitedNot allowed in the district at all, short of rezoning or a variance. signs

  Signs without a permit, signs attached to natural vegetation, signs simulating traffic control devices, etc.

• Sign allotment as percentage of building frontageFrontageThe length of a lot line that touches a public street.10 pct

  or a total face area of not more than ten (10) percent of building frontage square footage

• Sign allotment per linear foot of street frontageFrontageThe length of a lot line that touches a public street.1 sqft_per_ft

  One (1) square foot of signage is permitted for every one (1) linear foot of street frontage