Hanover County Unincorporated, Virginia · General provision
Section 26-277
Extracted standards
3 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Maximum construction sign area in M-3 districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2.150 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
The maximum area of a sign shall be seventy-five (75) square feet plus one square foot per five (5) feet of lot frontage over one hundred (100) feet, up to a maximum of one hundred fifty (150) square feet.
- Maximum marquee sign area in M-3 districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2.5 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
signs are limited in size to five (5) square feet
- Maximum projecting sign area in M-3 districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2.32 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
signs are limited in size to thirty-two (32) square feet
From the ordinance
In the M-3, Heavy Industrial District: Signs are permitted as specified in subsection (b), M-2 District, with the following exceptions: (1) Projections signs: As specified in subsection (b), except signs are limited in size to thirty-two (32) square feet. (2) Marquee signs: As specified in subsection (b), except signs are limited in size to five (5) square feet. (3) Construction signs: ... The maximum area of a sign shall be seventy-five (75) square feet plus one square foot per five (5) feet of lot frontage over one hundred (100) feet, up to a maximum of one hundred fifty (150) square feet.