19-7
Dimensional standards
Extracted standards
6 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Lighting
- Full cut-off fixtures required
All lighting fixtures serving these areas shall be full cut-off fixtures and shall be mounted horizontal to the ground.
- Maximum lighting fixture mounting heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.25 ft
Maximum mounting height: 25 feet
- Maximum spillover light at property line0.5 fc
Spillover light from commercial and industrial uses and zoning districts that are adjacent to public roads and those parcels in residential, agricultural and conservation zoning districts shall not exceed one-half footcandle at the property line.
- Minimum parkingMinimum parkingThe number of off-street spaces a development must provide before it may open. lot lighting level after reduction0.2 fc
this provision shall not require parking lot lighting levels to be reduced to less than 0.2 footcandles as measured horizontally at the surface on which the light pole is mounted.
- Parking lot lighting reduction after close of business50 pct
On parcels which contain a minimum of ten parking lot light poles, shall be reduced by a least 50 percent of full operational levels within one hour after the close of business
- High intensity light beams prohibitedProhibitedNot allowed in the district at all, short of rezoning or a variance.
High intensity light beams in the form of outdoor search lights, lasers or strobe lights shall not be permitted.
From the ordinance
Maximum mounting height: 25 feet. Spillover light from commercial and industrial uses and zoning districts that are adjacent to public roads and those parcels in residential, agricultural and conservation zoning districts shall not exceed one-half footcandle at the property line.