Frederick County Unincorporated, Virginia · General provision

§ 165-204.06

All Frederick County Unincorporated districts0

Dimensional standards

Plan view of the district’s stated lot requirements. Solid line: the property line. Dashed: the setback lines the ordinance imposes; a building must stay inside the tinted envelope. Drawn from the figures extracted below — illustrative, not a survey.

Setbacks

Front: 30 ft
Rear: 120 ft
Side: 30 ft

Extracted standards

6 individual requirements pulled out of this section’s prose, each with the sentence it came from.

Other

Flex-tech enclosed structures
All uses shall be conducted entirely within enclosed structures.
Flex-tech loading bay screening
All loading bays shall be located so that they are not visible from road rights-of-way. All loading bays shall be screened from view by the building, landscaping, walls or decorative fencing.
Flex-tech max unit size20,000 sqft
Maximum unit sizes shall be 20,000 square feet.
Flex-tech primary use min pct75 pct
The primary use shall occupy a minimum of 75% of an establishment, measured in gross floor area of the unit.
Flex-tech traffic separation
Entrances onto the site shall clearly separate automobile traffic from truck traffic. Automobile parking and truck loading areas shall be clearly separated.

Parking

Flex-tech truck parking screening
Except during the process of loading or unloading, trucks and trailers shall not be parked outside the building, unless parked in screened areas not visible from adjacent road rights-of-way or properties.

From the ordinance

Minimum on-site building separation shall be as follows: Front yard: 30 feet. Side yard: 30 feet. Rear yard: 120 feet.
§ 165-204.06