Chesapeake, Virginia · General provision

§ 12-605

Dimensional standards

lot requirementsSTREETbuildable areaFront 0 ftRear 0 ftSide 5 ftMAX HEIGHT40 ftMAX DENSITY30 du/ac
Plan view of the district’s stated lot requirements. Solid line: the property line. Dashed: the setback lines the ordinance imposes; a building must stay inside the tinted envelope. Drawn from the figures extracted below — illustrative, not a survey.

Extracted standards

12 individual requirements pulled out of this section’s prose, each with the sentence it came from.

Design

  • Neutral colors required

    Only neutral colors shall be used on the exterior of buildings.

  • Pedestrian entrance required

    When parking for a new construction is to be located in the rear yard, at least one (1) pedestrian entrance to the building shall be located on the front of the building facing the thoroughfare.

  • Permanent overhang prohibition

    No permanent overhangs, including awnings and other building extensions other than signs, shall be constructed on any building located within the district

  • Building wall plane break interval10 ft

    the building wall plane facing a public thoroughfare must be broken along its length at least every ten (10) feet by either a public doorway or by a window having ... at least twelve (12) square feet in area ... lowest point no more than four (4) feet above the sidewalk.

Other

  • Buffer area required

    Buffer areas shall be provided in accordance with those standards established in section 19-600 et seq.

Parking

  • Parking location

    For all new buildings constructed on a site within the district, parking shall be located to the rear or side of the building

Signage

From the ordinance

The front setback may range from zero (0) to ten (10) percent of the lot depth. ... The maximum height of a building or structure shall be forty (40) feet. ... Multifamily residential as permitted within mixed use buildings ... shall not exceed a density of thirty (30) dwelling units per acre.
§ 12-605

Parking requirements

{
  "2plus_br": "1.5 spaces per unit",
  "studio_1br": "1 space per unit"
}