Buena Vista, Virginia · General provision
Sec. 904.09-1, 904.09-4, 904.09-6, 904.10, 904.11, 904.12
Extracted standards
8 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Cul-de-sac turn-around diameter100 ft
must be terminated by a turn-around of not less than 100 feet in diameter
- Hillside street intersection angle60 deg
In all hillside areas, streets running with contours shall be required to intersect at angles of not less than 60 degrees
- Minimum alley right-of-way width20 ft
if permitted the right-of-way will be not less than 20 feet
- Minimum base material width for alleys12 ft
and 12 feet for alleys
- Minimum base material width for streets30 ft
The base material shall be installed to a minimum width of 30 feet for streets
- Minimum pavement width20 ft
and a pavement width of 20 feet
- Minimum right-of-way width50 ft
all streets shall have, as a minimum, a right-of-way width of 50 feet
- Pavement surface thickness2 in
with a two-inch-final surface treated overlay
From the ordinance
For all subdivisions, all streets shall have, as a minimum, a right-of-way width of 50 feet and a pavement width of 20 feet... Streets designed to have one end permanently closed must be terminated by a turn-around of not less than 100 feet in diameter.