Dimensional standards
Servicing
- Geographic extent
- Applies along all streets, except single-familySingle-family dwellingOne dwelling unit on its own lot, usually detached from its neighbours. detached dwellings on existing lots of record. Special rates apply in B-1, RIn, R-1, R-2, R-3, R-4, and R-5 districts.
Extracted standards
4 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Landscaping & trees
- Maximum distance from street line for street trees when no landscaped setbackSetbackThe distance a building must be held back from a lot line.10 ft
In any case where a landscaped setback is not required by ATC section 21-233, required street trees may be located within the street right-of-way or on the lot and within ten (10) feet of the street line.
- Minimum caliper of street trees at planting2.5 in
Trees to be credited toward the street tree requirement shall be deciduous trees having a caliper of not less than two and one-half (2 1/2) inches at the time of planting...
- Street tree rate (general)50 ft per tree
Street trees shall be provided at the rate of not less than one (1) tree for each fifty (50) linear feet, or major fraction thereof, of street frontage.
- Street tree rate in B-1, RIn, R-1, R-2, R-3, R-4, R-540 ft per tree
In B-1, RIn, R-1, R-2, R-3, R-4, and R-5, this rate shall be not less than one (1) tree for each forty (40) linear feet unless the administrator reduces or eliminates this standard based on the size, street frontage, existing vegetation, or specific conditions of the site.
From the ordinance
Street trees shall be provided at the rate of not less than one (1) tree for each fifty (50) linear feet, or major fraction thereof, of street frontage. In B-1, RIn, R-1, R-2, R-3, R-4, and R-5, this rate shall be not less than one (1) tree for each forty (40) linear feet...