Extracted standards
8 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Building setbackSetbackThe distance a building must be held back from a lot line. lines required on final plat
Building setback lines, with distance to street right-of-way and length of the setback line for each lot.
- Distance for showing existing buildings100 ft
The location of existing buildings in and within 100 feet of the subdivision
- Index map scale600 ft per inch
at a scale no smaller than 600 feet to one inch.
- Distance for showing landmarks2,000 ft
within 2,000 feet of the proposed subdivision shown on an insert
- Maximum lots for administrative review4 lots
subdivision not exceeding four lots in size
- Minimum plat scale100 ft per inch
The scale shall not be less than one inch equals 100 feet.
- Minimum acreage and frontageFrontageThe length of a lot line that touches a public street. width requirement
the reconfigured properties meet the minimum acreage and frontage width requirements
- Time limit for recording plat12 months
within one year of approval or it will become invalid.
From the ordinance
The preliminary plat shall be legibly drawn... scale shall not be less than one inch equals 100 feet.