Sec. 5.3.1 - 5.3.8
Extracted standards
17 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Density
- Conform to districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. maximum gross density
A manufactured home park shall conform to the maximum gross density requirements of the district in which it is located.
Other
- Cul-de-sac minimum radius45 ft
Cul-de-sacs shall have a minimum radius of 45 feet measured to the edge of pavement.
- Individual sewer and water connection
Each manufactured home lot shall be provided with an individual connection to an approved sanitary sewage disposal system and an individual connection to an approved central water supply or other potable water supply.
- Internal private street right-of-way width40 ft
A minimum right-of-way width of 40 feet shall be established on internal private streets for the purpose of measuring setbacks.
- Minimum radius of edge of pavement at intersections25 ft
Minimum radius of edge of pavement at intersections is 25 feet.
- Maximum longitudinal street grade10 pct
Maximum longitudinal street grade is ten percent.
- Minimum horizontal centerline curve radius250 ft
Minimum horizontal centerline curve radius is 250 feet.
- Minimum distance between manufactured homesManufactured homeA dwelling built in a factory to a federal standard and transported to the site.30 ft
The minimum distance between manufactured homes shall be 30 feet.
- Minimum manufactured homeManufactured homeA dwelling built in a factory to a federal standard and transported to the site. park size5 acresacre43,560 square feet — about the size of an American football field without the end zones.
A manufactured home park shall consist of five or more contiguous acres.
- Minimum vertical stopping sight distance100 ft
Minimum vertical stopping sight distance is 100 feet.
- Street width for no on-street parking up to 50 sites20 ft
Streets with no on-street parking serving up to 50 manufactured home sites shall have a minimum width of 20 feet.
Parking
- Off-street parkingMinimum parkingThe number of off-street spaces a development must provide before it may open. per section 4.12
Off-street parking for manufactured homes, recreational uses and service areas shall be provided in accordance with section 4.12 of this ordinance.
Setback
- SetbackSetbackThe distance a building must be held back from a lot line. from internal private streets15 ft
Manufactured homes and other structures shall be set back at least 15 feet from the right-of-way of internal private streets, common walkways and common recreational or service areas.
- SetbackSetbackThe distance a building must be held back from a lot line. from manufactured homeManufactured homeA dwelling built in a factory to a federal standard and transported to the site. space lot line6 ft
Manufactured homes and other structures shall be set back at least six feet from any manufactured home space lot line.
- SetbackSetbackThe distance a building must be held back from a lot line. from park property line adjacent to residential/rural50 ft
Manufactured homes and other structures shall be set back at least 50 feet from the manufactured home park property line when it is adjacent to a residential or rural areas district.
- SetbackSetbackThe distance a building must be held back from a lot line. from public street right-of-way50 ft
Manufactured homes and other structures shall be set back at least 50 feet from the right-of-way of an existing public street.
- SetbackSetbackThe distance a building must be held back from a lot line. from service or recreational structure50 ft
No manufactured home shall be located closer than 50 feet from any service or recreational structure intended to be used by more than one manufactured home.
From the ordinance
A manufactured home park shall consist of five or more contiguous acres. A manufactured home park shall conform to the maximum gross density requirements of the district in which it is located. Each manufactured home lot shall comply with the following area and width requirements: [table]. Each manufactured home shall be located on a manufactured home lot. ... No manufactured home shall be located closer than 50 feet from any service or recreational structure intended to be used by more than one manufactured home. The minimum distance between manufactured homes shall be 30 feet. ... Manufactured homes and other structures shall be set back at least 50 feet from the right-of-way of an existing public street. ... Manufactured homes and other structures shall be set back at least 50 feet from the manufactured home park property line when it is adjacent to a residential or rural areas district. ... Manufactured homes and other structures shall be set back at least 15 feet from the right-of-way of internal private streets, common walkways and common recreational or service areas. ... Manufactured homes and other structures shall be set back at least six feet from any manufactured home space lot line. ... Each manufactured home lot shall be provided with an individual connection to an approved sanitary sewage disposal system and an individual connection to an approved central water supply or other potable water supply. ... Off-street parking for manufactured homes, recreational uses and service areas shall be provided in accordance with section 4.12 of this ordinance. ... A minimum right-of-way width of 40 feet shall be established on internal private streets for the purpose of measuring setbacks. ... Streets with no on-street parking serving up to 50 manufactured home sites shall have a minimum width of 20 feet. ... Maximum longitudinal street grade is ten percent. ... Minimum vertical stopping sight distance is 100 feet. ... Minimum horizontal centerline curve radius is 250 feet. ... Cul-de-sacs shall have a minimum radius of 45 feet measured to the edge of pavement. ... Minimum radius of edge of pavement at intersections is 25 feet.