Sec. 106-226
Dimensional standards
Servicing
- Applies near
- US Route 13
- Geographic extent
- Applies to developments abutting US Route 13
Extracted standards
6 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Access points per tract1 count
Each existing tract of land is entitled to one direct or indirect access point to the public roadway network provided that its location and design fulfill, as a minimum, the minimum corner clearance and minimum sight distance requirements of this chapter.
- FrontageFrontageThe length of a lot line that touches a public street. for additional access point500 ft
Where the roadway frontage of a tract of land is greater than 500 feet, an additional access point may be allowed, if it is determined that the access point will not adversely affect the capacity of the roadway.
- Minimum corner clearance from signalized intersections200 ft
The minimum corner clearance of driveways from intersecting streets shall be 200 feet for signalized intersections and 100 feet for stop sign controlled intersections.
- Minimum corner clearance from stop sign controlled intersections100 ft
The minimum corner clearance of driveways from intersecting streets shall be 200 feet for signalized intersections and 100 feet for stop sign controlled intersections.
- Minimum plan scale50 ft per inch
The scale of plans shall be no less than one-inch equals 50 feet, unless otherwise approved by the zoning administrator.
- Minimum sight distance along Route 131,000 ft
Sight distances provided along Route 13 shall be a minimum of 1,000 feet.
From the ordinance
The scale of plans shall be no less than one-inch equals 50 feet, unless otherwise approved by the zoning administrator. Each existing tract of land is entitled to one direct or indirect access point to the public roadway network provided that its location and design fulfill, as a minimum, the minimum corner clearance and minimum sight distance requirements of this chapter.