Dimensional standards
Extracted standards
18 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Changeable sign message interval12 seconds
The message shall not be changed more than once every 12 seconds
- Changeable sign photometric limit0.3 footcandles
A photometric plan is required to verify the digital changeable sign's light does not exceed 0.3 footcandles over ambient light.
- Construction sign max area16 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Such signs shall not exceed an area of 16 square feet and a height of six feet.
- Construction sign max heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.6 ft
Such signs shall not exceed an area of 16 square feet and a height of six feet.
- Construction sign per street frontageFrontageThe length of a lot line that touches a public street.1 signs
Only one sign per street frontage shall be allowed.
- Construction sign setbackSetbackThe distance a building must be held back from a lot line. from property lines20 ft
Each sign shall be at least 20 feet from contiguous property lines of adjacent landowners
- Construction sign setbackSetbackThe distance a building must be held back from a lot line. from right-of-way5 ft
and at least five feet from any right-of-way.
- Entrance/exit sign per connection1 signs
Only one entrance and exit sign may be permitted at the connection of the street and driveway.
- Internal lighting allowed in business/industrial districts
Signs within a business or industrial district may be internally lighted, unless such lighting is specifically prohibited in this article.
- Maximum illumination during day10,000 nits
Illumination shall be no greater than 10,000 nits or footcandles from sunrise to sunset
- Maximum illumination during night700 nits
or 700 nits or footcandles from sunset to sunrise
- Minimum setbackSetbackThe distance a building must be held back from a lot line. from right-of-way
The minimum setback from any right-of-way, unless otherwise specified, is half the height of the sign.
- Nonresidential sign illumination in residential districts
Nonresidential signs within a residential district may be illuminated as outlined in Section 8-4-6.
- Projecting sign maximum extension6 ft
Projecting signs shall not extend more than six feet beyond the face of the building or beyond a vertical plane two feet inside the curbline.
- Projecting sign minimum heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.8 ft
Signs projecting over public walkways shall be a minimum height of eight feet from grade level to the bottom of the sign.
- Residential off-premise temporary sign max area32 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Temporary off-premise signage is not to exceed 32 square feet.
- Temporary sign permit duration30 days
Temporary sign permits shall be issued for no more than 30 days per quarter.
- Window signs permitted only on first floor
Window signs are permitted only on the first floor of a building unless the business advertised is only on the floor where the window sign is displayed.
From the ordinance
The minimum setback from any right-of-way, unless otherwise specified, is half the height of the sign. Illumination shall be no greater than 10,000 nits or footcandles from sunrise to sunset or 700 nits or footcandles from sunset to sunrise...