Sec. 34-152
Extracted standards
3 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Bridge and culvert approval
Bridges and culverts must be constructed and approved before the developer is released from bond, if bond has been posted. If bond is not posted, bridges and culverts must be constructed and approved by the town engineer before the sale of any lot in the subdivision, and issuance of any final development order or certificate of occupancy for any lot in the subdivision.
- Minimum bridge width
The minimum width of bridges shall meet state road specifications for arterial roads and shall be the minimum width of the paving section plus three feet of each side for all other roads.
- Culvert size
Culverts shall be of such size as to provide adequate drainage opening, and of sufficient length to extend beyond the curb limits of a road.
From the ordinance
The minimum width of bridges shall meet state road specifications for arterial roads and shall be the minimum width of the paving section plus three feet of each side for all other roads.