72-41.2D

Other

• Facade differentiation every 100 feet

  Any building facade visible from adjacent properties or public streets shall incorporate differentiation that breaks the mass of the facade every 100 horizontal linear feet...

• Primary facade materials limited

  Primary facade materials shall be limited to one or more of the following: tinted textured masonry block, pre-cast concrete, tilt-up concrete panels, brick or stone veneer, glass (clear or architectural panels), stucco and external insulation finish system that simulates a stucco appearance, metal panel systems, structural metal siding, or smooth-faced concrete blocks.

• Minimum fenestration percentage15 pct

  Windows, doors, or similar fenestration design features such as faux windows must be distributed horizontally and vertically across the facade and comprise a minimum of 15% of each visible building facade.

• Screening of accessoryAccessory useA secondary activity customarily incidental to the main use of the lot — a garage, a home office. equipment

  To minimize visibility from adjacent public streets and properties outside of common ownership or operated as a campus as defined by Section 72-34.9, Subsection B, ground-level and rooftop accessory equipment shall be screened.

• Water-based cooling system evaluation

  A water-based cooling system associated with a data center shall be evaluated to determine whether existing public water and sanitary sewer conveyance and treatment facilities are adequate for the proposed use...