Dimensional standards
Extracted standards
10 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Frontage
- FrontageFrontageThe length of a lot line that touches a public street. standards required
Frontage standards shall include the following elements: a Frontage Map, public frontage component, and private frontage component.
Other
- Building type and placement standards required
Building Type and Placement Standards focus on the architectural planning of the building to complete the built form.
- DistrictZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. regulations govern conflicts
Where regulations within this district conflict with other provisions within this chapter, these district regulations shall govern.
- Fallback requirements for existing approved districts
In the event that site size requirements, setbacks, or other information are not depicted on a General Development Plan approved prior to the adoption of this ordinance, then the requirements set forth in § 72-31.4, Residential (R-8) District, shall apply to single-family detached and attached dwellings, and the requirements in § 72-31.5, Residential (R-12) District, shall apply to multifamily dwellings.
- Option to use Form Based Code Appendix
An applicant may opt to use the City's Form Based Code Appendix.
- Formal open spaceOpen spaceLand a development must leave unbuilt, sometimes required to be usable or planted. requirement
Half of the required open space shall be usable formal open space.
- Minimum general open spaceOpen spaceLand a development must leave unbuilt, sometimes required to be usable or planted.15 pct
A minimum of 15% of the total gross area of the site shall be general open space.
- Optional forms of development allowed
An applicant may include optional forms of development as by-right options similar to what has been adopted in the City's Form Based Code.
- Project development criteria
The following project development criteria shall be incorporated into the General Development Plan for an overall PD-MU development in order to promote sustainability.
- Transitional zone required when abutting single-familySingle-family dwellingOne dwelling unit on its own lot, usually detached from its neighbours. detached residential lots
Transitional Zones shall be established where a development abuts single-family detached residential lots.
From the ordinance
Heights shall not exceed 80 feet within a PD-MU District.