§ 165-201.06B(4)(b), § 165-201.05B(2), § 165-201.05B(3), § 165-201.11B(2)(a), § 165-201.08A
Extracted standards
11 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Environmental
- RP environmental protection
The requirements of § 165-201.08 apply to the RP District.
Other
- RP accessoryAccessory useA secondary activity customarily incidental to the main use of the lot — a garage, a home office. dwelling must be attached
In the RP District, accessory dwellings shall only be allowed if they are attached to the primary residential structure.
- RP mobile homeManufactured homeA dwelling built in a factory to a federal standard and transported to the site. as accessoryAccessory useA secondary activity customarily incidental to the main use of the lot — a garage, a home office. dwelling prohibitedProhibitedNot allowed in the district at all, short of rezoning or a variance.
In no case shall a mobile home be allowed as an accessory dwelling in the RP District.
- RP by-rightBy rightPermitted outright: if the plans meet the written rules, permission cannot be withheld. use sign area25 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Signs in RP District for by-right uses must not exceed 25 square feet in sign area.
- RP by-rightBy rightPermitted outright: if the plans meet the written rules, permission cannot be withheld. use sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.4 ft
Signs in RP District for by-right uses must not exceed four feet in height.
- RP by-rightBy rightPermitted outright: if the plans meet the written rules, permission cannot be withheld. use sign number1 per parcel
One sign is permitted per parcel for by-right uses in RP District.
- RP cottage occupation sign4 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Cottage occupation signs not to exceed five feet in height nor four square feet in area.
- RP property owners' association required
The developer shall provide for the establishment of an organization or corporation for the ownership, perpetuation and maintenance of all private elements in developments in the RP District.
- RP subdivision identification sign area32 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Subdivision identification signs must not exceed 32 square feet in sign area.
- RP subdivision identification sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.8 ft
Subdivision identification signs must not exceed eight feet in height.
- RP subdivision identification sign number1 per entrance
One subdivision identification sign per entrance in RP District.
From the ordinance
RP District sign regulations, accessory dwelling attachment, mobile home prohibition, property owners' association, environmental protection.