Sec. 22-26-5
Extracted standards
4 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Guardrails meet VDOT
All guardrails in parking and loading facilities shall meet VDOT specifications.
- Minimum pavement base thickness6 in
such improvement shall not be less than six (6) inches of Virginia Department of Transportation #21 or #21A aggregate base together with prime and double seal or equivalent.
- Parking space marking required
All parking and loading facilities shall be marked by painted lines, curbs, wheelstops, bumper blocks, or similar means to indicate individual spaces.
- Reduced pavement base thickness3 in
the required improvement may be reduced to three inches (3") of gravel in the following cases: (1) for parking for places of worship and other assembly uses where evidence is presented to the Zoning Administrator that these spaces will not be used regularly on a daily basis or more than three (3) times a week; (2) for areas of display or storage of vehicles, mobile homes, machinery or other inventory requiring motor vehicle access for placement; provided, in no case, shall grassed or unimproved areas be devoted to inventory storage; or (3) single or two family dwelling units and uses adjacent or within that unit such as a small home industry, bed and breakfast, home occupation, etc.
From the ordinance
All access aisles, parking, and loading facilities for five (5) or more vehicles shall be surfaced in accordance with intensity of usage and such improvement shall not be less than six (6) inches of Virginia Department of Transportation #21 or #21A aggregate base together with prime and double seal or equivalent.