Sec. 22-17-11
Dimensional standards
Servicing
- Geographic extent
- All parcels in Fluvanna County
Extracted standards
5 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Frontage
- FrontageFrontageThe length of a lot line that touches a public street. on access easement
For a lot located at the end of an access easement, frontage shall not be less than the full width of the easement.
Frontage on a cul-de-sac may be reduced to not less than fifty feet (50'), provided that driveway separation shall be in accordance with the standards of the Virginia Department of Transportation and no more than five (5) lots shall have frontage on any one cul-de-sac.
- Lot widthLot widthHow wide a lot must be, usually measured at the front setback line. at setbackSetbackThe distance a building must be held back from a lot line. line
Minimum required lot width at the setback line shall be the same as the minimum frontage required by the regulations of the district in which the parcel is located and shall not be reduced under this section.
- Maximum lots on a cul-de-sac5 lots
no more than five (5) lots shall have frontage on any one cul-de-sac.
- Public road abutment required
Except as otherwise expressly provided in this chapter, every parcel of land shall abut a road dedicated to public use and maintained by the Virginia Department of Transportation.
From the ordinance
Except as otherwise expressly provided in this chapter, every parcel of land shall abut a road dedicated to public use and maintained by the Virginia Department of Transportation. Except as specifically permitted in this section, frontage shall not be less than required by the regulations of the district in which the parcel is located.