Extracted standards
6 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Type A buffer minimum width10 ft
Rear and/or side transition yards between residential and nonresidential lots (minimum width: ten feet).
- Type A opaque screen heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.8 ft
This type functions as an opaque screen from the ground to a height of at least eight feet.
- Type A shrub heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. at installation3 ft
Shrub plantings shall have a minimum height of three feet at installation.
- Type A tree heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. at maturity20 ft
Intermittent planting of deciduous and evergreen trees shall obtain a height at maturity of no less than 20 feet.
- Type B buffer minimum width10 ft
Perimeter yard of all multifamily, mixed-use, and nonresidential parking areas visible from the street (minimum width: ten feet).
- Type B semi-opaque screen heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.4 ft
This type functions as a semi-opaque screen from the ground to at least a height of four feet for screening of car lights and glare.
From the ordinance
The three types of landscaping are defined as follows... Type A (opaque screen/buffer) for rear/side transition yards between residential and nonresidential lots (min width 10 ft). Type B (semi-opaque screen) for perimeter yard of multifamily, mixed-use, and nonresidential parking areas visible from street (min width 10 ft).