Appomattox County Unincorporated, Virginia · General provision
§ 19.6-84
Dimensional standards
Lot
Density
Extracted standards
8 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Buffer yardYardThe open space left between a building and its lot line — the space a setback creates. width along side and rear perimeter50 ft
A fifty-foot buffer yard shall be installed along the side and rear perimeter of the park.
- Cul-de-sac minimum diameter80 ft
Culs-de-sac: shall have a minimum diameter of 80 feet.
- Maximum gradient for private streets12 pct
Maximum gradient: 12%.
- Minimum area for each lot in mobile homeManufactured homeA dwelling built in a factory to a federal standard and transported to the site. park5,000 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Minimum area for each lot in the park: 5,000 square feet
- Minimum width for each lot in mobile homeManufactured homeA dwelling built in a factory to a federal standard and transported to the site. park40 ft
Minimum width for each lot in the park: 40 feet.
- Minimum recreation area as percentage of park8 pct
Minimum usable space for recreational areas: 8% of the gross area of the manufactured home park.
- Private street width in mobile homeManufactured homeA dwelling built in a factory to a federal standard and transported to the site. park20 ft
Street width: 20 feet.
Parking
- Minimum parkingMinimum parkingThe number of off-street spaces a development must provide before it may open. spaces per manufactured homeManufactured homeA dwelling built in a factory to a federal standard and transported to the site. lot2 spaces
Each manufactured home lot shall have the equivalent of two parking spaces.
From the ordinance
Minimum tract size for any new or expanding park: five contiguous acres. ...
Parking requirements
{
"manufactured_home_lot": "2 spaces"
}