Extracted standards
7 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Noise
- Noise-generating work must be enclosed
All body and fender work or similar noise-generating activity must be enclosed in a masonry or similar building with sound-attenuating measures incorporated into the building design and construction to absorb noise.
Other
- Exterior storage visibility
Exterior storage, including tires, must not be visible from arterial streets or a Residential District.
- Outdoor storage of discarded parts prohibitedProhibitedNot allowed in the district at all, short of rezoning or a variance.
No used or discarded automotive parts or equipment or permanently disabled, junked, unregistered, or wrecked vehicles may be stored outside of the main building, except in an approved location on-site.
- Minimum spray booth separation after HHRA100 ft
The Planning Commission may reduce this separation to no less than 100 feet if a human health risk assessment (HHRA)...
- Spray booth separation from sensitive uses500 ft
Spray booth stacks must be screened from arterial streets, and must be separated a minimum of 500 feet from Residential districts, parks, schools, and daycare centers.
- Vehicle storage screening
Vehicles being worked on or awaiting service or pick up must be stored within an enclosed building or in a parking lot that is adequately screened, with an earthen berm, screen wall or a building.
- Work must be in enclosed building
All work must be conducted within an enclosed building, except pumping motor vehicle fluids, checking and supplementing fluids, and mechanical inspection and adjustments not involving any disassembly.
From the ordinance
Major automobile/vehicle repair facilities, including facilities accessory to a dealership, must be located, developed, and operated in compliance with the following standards, where allowed by the 200 Series Base Zoning Districts