Richmond, California · General provision
15.04.402.050 (T5 Main Street) / 15.04.402.060 (T5 Core)
Extracted standards
7 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Fencing & walls
Entire BTL shall be defined by a building or a 24" to 42" high fence or stucco or masonry wall.
Fencing and/or gates shall be set behind max. front setback.
Height
- HeightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first. near residential35 ft
35' max. within 50' of a T4N or Residential District.
Other
- BTL corner definition50 ft
On corner lots, the BTL must be defined by a building for the first 50' from the corner.
- Building width series75 ft
Buildings wider than 100' shall be designed to read as a series of buildings no wider than 75' each.
- Chamfered corner allowed
A building form with a chamfered corner is allowed on a corner lot if a corner entry is provided.
- Service entry prohibition
Loading docks, overhead doors, and other service entries may not be located on street-facing facades.
From the ordinance
A building form with a chamfered corner is allowed on a corner lot if a corner entry is provided. Entire BTL shall be defined by a building or a 24" to 42" high fence or stucco or masonry wall. Fencing and/or gates shall be set behind max. front setback.