Extracted standards
5 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Group sign area increase percentage50 pct
A sign relating to a group of establishments, as in a shopping center, may be up to fifty percent greater than the allowed area for a single business, profession or service.
- Maximum hours of operation sign area1 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Each business may have one additional sign of one square foot maximum size to describe hours of operation.
- Maximum identification sign area per foot of building frontageFrontageThe length of a lot line that touches a public street.0.5 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000./ft
The maximum total size of permanent identification signs shall be one-half square foot of sign area per one lineal foot of the building frontage
- Maximum total identification sign area for two signs24 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
or twenty-four square feet maximum for the two signs combined.
- Sign setbackSetbackThe distance a building must be held back from a lot line. from R districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2. side line25 ft
A sign shall not face the side line of any adjoining lot in any R district when such sign is within twenty-five feet of the side line.
From the ordinance
Each business, profession, or service is allowed on the same parcel with the establishment two permanent identification signs... maximum total size ... one-half square foot of sign area per one lineal foot of the building frontage, or twenty-four square feet maximum