Placer County Unincorporated, California · General provision
Section 17.54.100
Planned DevelopmentAll Placer County Unincorporated districts0
Dimensional standards
Extracted standards
5 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Density
- Net buildable area deductions
Net buildable area excludes public road ROW, dedications, major electrical transmission easements (60kv+), 100-year floodplain, and slopes >=30%.
- Single-familySingle-family dwellingOne dwelling unit on its own lot, usually detached from its neighbours. density increase
Max density = base zoning + 5% if 20% open space, plus up to 50% increase with public benefits, but never exceed -PD designation.
Other
- Maximum coverage by lot size
Maximum coverage per lot is calculated from chart based on lot size.
- SetbacksSetbackThe distance a building must be held back from a lot line. from base districtZoning districtA mapped area with one set of rules, identified by a code like R-1 or B-2.
Front, side, rear setbacks and height shall be those of the district with which the -PD designation is combined.
Parking
- Parking standards
Parking shall satisfy Sections 17.54.050 and 17.54.060 or special provisions in CUP.
From the ordinance
Every single-family PD shall include a minimum of 20% of the site dedicated for use as open space.