Section 17.56.080(D) (Recreational Vehicle Parks)
Dimensional standards
Extracted standards
9 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Other
- Maximum roadway grade above 3000 ft elevation10 pct
and 10% on roadways above 3,000 feet in elevation.
- Maximum roadway grade below 3000 ft elevation15 pct
The maximum grade on all roadways below 3,000 feet in elevation shall be 15%
- Minimum recreation area15 pct
Fifteen percent of the park shall be devoted to recreational usages and facilities
Signage
- Maximum aggregate sign area in C-1, C-2, HS zones outside Tahoe Basin150 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Parks located in C-1, C-2, or HS zone districts and outside of the Tahoe Basin shall be allowed up to 150 square feet of sign area
- Maximum aggregate sign area in RM zone outside Tahoe Basin80 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Parks located in the RM zone district and outside the Tahoe Basin shall be allowed up to 80 square feet of sign area
- Maximum aggregate sign area in Tahoe-Sierra or MT zone50 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
Parks located within the Tahoe-Sierra area or motel (MT) district shall be limited to a maximum aggregate sign area of 50 square feet
- Maximum sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.25 ft
The maximum height for signs shall be 25 feet, but no higher than the height of the tallest building on the site.
- Maximum single sign area in C-1, C-2, HS zones75 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
No single sign shall exceed 75 square feet.
- Maximum single sign area in RM zone40 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
No single sign shall exceed 40 square feet.
From the ordinance
A maximum of 15 units per acre, or lower density as required by the approval body.