Placer County Unincorporated, California · General provision
17.54.190D2
Extracted standards
3 individual requirements pulled out of this section’s prose, each with the sentence it came from.
Signage
- Subdivision sign area36 sqftsq ftSquare feet. An acre is 43,560 sq ft; a typical suburban lot is 7,000–10,000.
The display area shall be a maximum of 36 square feet, with no individual subdivision sign exceeding 18 square feet.
- Subdivision sign heightMaximum heightThe tallest a building may be, given in feet, in storeys, or both — whichever binds first.6 ft
The sign structure shall not exceed six feet in height, measured from the existing grade to the highest point on the sign.
- Subdivision sign spacing1,000 ft
Not exceed one sign structure per intersection, nor be located within 1,000 feet of any other off-premises subdivision sign.
From the ordinance
The display area shall be a maximum of 36 square feet, with no individual subdivision sign exceeding 18 square feet; the sign structure shall not exceed six feet in height.