Highlighted below: 1 of 3 extracted standards. Sections and highlights carry their own anchors. The rest quote wording that differs from this rendering of the text.
7.2.301: OR: OFFICE RESIDENTIAL#
A. Purpose#
The OR district accommodates a mix of residential uses, low intensity office uses, and compatible low-intensity commercial uses. Land uses are as indicated in Table 7.3.2-A (Base and NNA-O District Use Table). OR zone districts are intended to generally located at the edges of, or internal to, a residential neighborhood, at a local street intersection with a collector or arterial street. OR zone districts are intended to accommodate a limit mixed of non-residential uses that will have minimal impact on nearby residential neighborhoods and have safe and convenient pedestrian and bicycle access. The layout of permitted use types shall be as shown in a Land Use Plan approved pursuant to Section 7.5.514 (Land Use Plan).
B. Dimensional Standards#
The following table is a summary of key district-specific dimensional standards. Complete dimensional standards, including standards for accessory structures, are included in Part 7.4.2 (Dimensional Standards) and Section 7.3.304 (Accessory Uses).
Table 7.2.3-A#
OR: Lot and Building Standards
| District Standards | ||
|---|---|---|
| District area (minimum) | N/A | |
| Lot Standards | ||
| Lot area (minimum) | 5,000 sf | |
| Lot width (minimum) | 50 ft | |
| Lot coverage (maximum) | 50% | |
| Setbacks (minimum) [1] [2] | ||
| A | Front | |
| Minimum | 25 ft | |
| B | Side - Interior | 5 ft |
| Corner Lot - Side Street | 15 ft | |
| C | Rear | 20 ft |
| Height (maximum) | ||
| D | Building height | 35 ft |
Notes: [1] Pursuant to Section 7.4.905 (Street Frontage and Street Trees), if the landscape setback is greater than the setback listed in this table, the landscape setback prevails. [2] For single-family detached dwellings and associated accessory dwelling units, the dimensional standards of the R-1 6 Zone District (see Table 7.4.2-A) apply. For two-family dwellings, the dimensional standards of the R-2 Zone District (see Table 7.4.2-A) apply. For all other residential uses, the dimensional standards of the R-5 Zone district (see Table 7.4.2-A) apply.
C. Additional Standards#
-
When land is zoned into this zone district after the Effective Date, the Manager may require that a Land Use Plan be approved along with the rezoning.§ A Land Use Plan that integrates multi-family uses may qualify the development for incentives pursuant to Section 7.4.202 (Incentives).
-
Reference Part 7.3.3 for additional use-specific standards. (Ord. 23-03; Ord. 25-45)